Posted by John Britt

Cadagon Design

I had some questions on the design of a cadagon during the Glazing Techniques class so I thought I would post this image.  It is just like the salt shaker design just bigger.

Hope it helps,

www.johnbrittpottery.com
Email Post

Comments

Togeika said…
John, I make the spout a little taller so the teapot can hole more. Also, it is pretty easy to make the spout and bottom separate from the bottomless body, and then assemble later. Thanks for the photos!
August 20, 2010 at 1:44 PM
John Britt said…
Lee,

You are right. That was made as a copy for a 13th century Oil Spot wine service, so it had to be that way.
August 20, 2010 at 2:30 PM
Nixon K said…
Sorry -- what is a "Cadagon"???
August 20, 2010 at 4:41 PM
Nixon K said…
Sorry -- I did but my initial search did not yield anything. Anyway, I read the post again and tried searching for Cadagon Teapot and did find something. Thanks, anyway!
August 20, 2010 at 5:00 PM
John Britt said…
How about this:

http://tinyurl.com/cadoganteapot
August 20, 2010 at 6:33 PM
Post a Comment